Originally posted by wingman
View Post
When Lyle bought the Bearcat in Valparaiso, Indiana one if the first order of getting it home was to separate the cockpit and wing center section from the rear fuselage. The rear fuselage was put on a pallet and shipped airfreight on TWA as Lyle worked for TWA and could arrange for discounted shipping from Chicago to Los Angeles. The cockpit and wing center section were a different deal, so Lyle found an old travel trailer and demolished the "house portion" of the trailer getting down to the bare chassis. Lyle had a couple of support sections welded onto the trailer to support the outer portion of the wings. Note there were no outer folding tips on the plane at this point. Thick carpeting was attached to the supports and a crane was used to place the center section gear up onto the repurposed trailer chassis. At this point he aft fuselage was removed and placed on a pallet for shipping. The aft fuselage was delivered to Aero Sport at Chino airport. The center section and trailer were moved by road pulled by a brand new green 1/2 Chevrolet truck Lyle purchased. The color wasn't important and the dealership was ready to sell the truck when Lyle walked in and bought it. At this point with the aft fuselage on it's way and Lyle out of time he took the center section to Earl Reinert's for storage unit he could bid his next time off from TWA to return to pickup the plane.
Lyle returned picked up the center section and drove it out to Los Alamitos, California via Brownfield, Texas where his parents lived this also avoiding increased snow on the northern route even though he did hit a little snow in New Mexico. The wing center section arrived in Los Alamitos and sat behind our condominium in the alley for a couple of weeks. This was when Lyle told me I was part of the crew and it was my job to guard the plane in the alley. I did get into a fight with some bigger kids when they wanted to play on it and I pushed them off.
Lyle found brand new hangars being built at Compton airport. He got there in time to choose hangar number F8 for his hulk of an airplane with it's assorted parts and pieces. Cliff Putnam from Lyle's travels at TWA had become interested in the project at this point and helped to make the jungle Jim assembly you see in the pictures. In December of 1968 Lyle and Cliff were working on trying to get the center section off the trailer and onto the jungle gym stand made of angle iron. Enter in another life changing moment a young Bill Hickle.
Bill said that he had a hangar two rows down from the F row and he passed by and spotted this "Hulk of a fighter plane" with a couple of guys scratching their heads trying to get it up on this angle iron stand. Bill talked with them and understood that they had not properly designed the stand so that the gear could be lowered, which meant when the time came for gear testing the landing gear would not be able to be tested. Bill jumped in and became the 3rd adult member of the team that would ultimately become family to me. Bill helped redesign and modify the stand by doing the welding to put the stand to use. By the end of the day ( night) the center section was resting on it's stand......and Lyle Shelton, Cliff Putnam and Bill Hickle had started a great adventure.
Now for the engine mount, Bill is a structural engineer. Lyle, had decided from the beginning to use the big Wright 18 cylinder radial. The version that initially was to be used was a -24W, this shared the same Dyna-Focal set up as the early Constellation engine so Lockheed had an on the shelf ring for the engine using six Dyna-Focal mounts to contain the engines thrust from running off the front of the plane. The original engine mount attach forgings were Re heat treated and attached to a mount designed by Bill Hickle that brought the thrust line of the airplane and the engine closer together. There was a welder who worked for either TWA or American Airlines that was an aviation certified welder Bill could not recall his first name however his last name was Hyman, bill not sure of the spelling. That engine mount was used through the whole program that Lyle used the airplane. An engineer for the Lord mount company did load calculations on it and we raced with it, bounced across rough deserts with it, bellied the airplane onto a runway in Mojave with it. Went really fast with it. After the runway at Mojave we had it magnaflux inspected and x-rayed, it was in great shape no damages noted. The engine mount performed flawless, and a major component of the future fastest piston engined airplane was in place.....and Bill Hickle was hooked.
I asked Bill if he ever stopped to realize that less than 9 months later they would be in the test flying stage? Bill said that everyone at that point was taking this project just as seriously as if they were building the Apollo rocket. It was becoming a tighter knit project and Cliff was leading the mechanical end while Lyle was out in deserts and swamps and warehouses buying F8 parts when he wasn't in Compton putting in huge hours.
More to come, Neal if you can find the pictures of the rear of the cockpit section repair I have some of that story next. I remember a before, during and after picture series.
Leave a comment: